Srinivas: +91 9966871942
Chaitanya: +91 9032444837
Siva: +91 8712383363

clc bricks plant



while the term formwork is generally used for all temporary works for holding concrete .clc bricks plant can not make with aluminium steels are fixed to prulins , as in the case of GI sheets by hook bots or drive screws made of aluminium and not GI bolts. In contact with steel, aluminium produces galvanic action. Clc bricks plant normally paint with bitumen paint or two coats of zinc rich paint before the sheets are laid on them.


The end laps are to be 150 mm(6 inches) for pitches of 15 degrees or more and for more than 15 degrees. The lap should be 225 mm ( 9 inches) as with GI sheets. The side laps should be 1 ½ corrugations laid away from the direction of heavy rains.for vertical sheeting,the side laps are to be as above but end laps can be 4 inches

Share...Share on Facebook0Tweet about this on Twitter0Share on Google+0Share on LinkedIn0Pin on Pinterest0


Siva & Srinivas
# 53-41-4, Near Sivalayam,
Maddilapalem, Visakhapatnam,
A.P. South India.


CLC Brick Qualities

Light in Weight
High Thermal Insulation
Flexible in Size
High Fire Protection
High Sound Insulation
Lower Water Absorption
Universal Acceptability